Oil Type. Toro specifies that 1.9 quarts (2.2 quarts when the filter is changed) of a detergent oil with an API service rating of SF, SG, SH, SJ or SL be used when changing the engine oil in their residential zero-turn-radius mowers.
How often do you change oil on a Toro Timecutter?
But, Toro recommends that the oil be changed every 100 hours, or after the first 5 hours for brand-new Toro zero-turn mowers. Luckily, it is an easy process that anyone can learn how to do.
What kind of oil does a Toro lawn mower use?
Recommended Oil type for Toro Walk Behind Mowers, 4-Cycle engines – SAE 30W Detergent oil with an API service classification of SF, SG, SH, SJ, SL, or higher. Run the engine for five minutes to warm the oil so it drains better.
What kind of oil does my Toro lawn mower use?
To maximize the performance of your Toro lawn mower, we highly recommend using Toro oil, which has been specifically formulated for best results. Toro SAE 30 engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines.
How much oil do I put in my Toro lawn mower?
The engine oil capacity should be 0.47 L (16 oz), the oil viscosity should be SAE 30 or SAE 10W-30 detergent oil, and the API service classification should be SJ or higher. Move the machine to a level surface. Remove the dipstick by rotating the cap counterclockwise and pulling it out.
What kind of hydraulic fluid goes in a Toro Zero Turn?
Toro produces a Premium Transmission/Hydraulic Tractor Fluid for use in its mowers and lawn tractors. The product is sold in both 5-gallon and 55-gallon containers. As an alternative, Toro recommends the use of Mobil 424 hydraulic fluid, made by Exxon-Mobil.
What engine is on a Toro TimeCutter?
The TimeCutter® SS5000 zero turn riding mower is powered by a 24.5 hp Toro V-Twin 708cc engine with self-cleaning air filtration system.
How do I check my Toro lawn mower oil?
- Move the machine to a level surface.
- Remove the dipstick (Figure 15). …
- Wipe off the dipstick end with a clean cloth.
- Insert the dipstick into the oil-fill tube, but do not screw it in, then remove the dipstick.
- Read the oil level on the dipstick (Figure 15).
Do zero turn mowers use hydraulic fluid?
What is the suggested Hydrostatic fluid to use on my Zero Turn machine? … The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.
Can I use 10w30 oil in my Toro lawn mower?
If the engine manufacturer’s operator manual recommends 10W-30 or 10W-40, the same motor oil types used in vehicles, then these can also be used in your lawn mower.
Article first time published on
What oil should I use in my zero turn lawn mower?
Use 5W-30 Synthetic Small-Engine Oil in small engines found in (not limited to) mowers (zero-turn, riding, stand-on, push), generators, power washers and other equipment that requires SAE 5W-30 motor oil, including those made by Kubota, Kawasaki, Robin, Onan, Linamar, Craftsman, Honda, Briggs and Stratton and Vanguard.
Is SAE 30 the same as 10w30?
SAE 10w30 oil has 10w thickness at low temperatures, but SAE 30 is at high temperatures. … In the straight SAE, 30 doesn’t and can have immense Viscosity and helpless pumpability at low temperatures. As SAE 10w30 is not thick in low temperature, while SAE 30 is in high temperature.
Do Toro mowers come with oil?
Your mower does not come with oil in the engine, but it does come with a bottle of oil. 1. Remove the dipstick (Figure 4).
How do I drain the oil from my lawn mower?
- Locate your air filter, spark plug and dipstick tube.
- Place a drain pan on the floor.
- Tilt the engine so that the dipstick tube is towards the pan and drain the oil through the dipstick tube.
What happens when you overfill the oil in a lawn mower?
Too much oil in your lawn mower may cause the engine to not run well and cause damaging results. Too much oil can cause your engine to overheat which can result in seal damage, blown gaskets or becoming hydrolocked.
Can I use 5W30 in my Toro lawn mower?
In cold weather conditions, you should use SAE 10W-30 or SAE 5W30 oil in your lawn mower. SAE 30 is usually the best option for smaller mowers and warm weather conditions. However, commercial mowers perform best on 15W30. Depending on the model, synthetic oil may also be suitable.
Why is my Toro lawn mower blowing white smoke?
Mower tipped over is the most common reason for white smoke. Usually, the customer turns over the mower to clean the deck or unclog the chute. This allows oil to enter the cylinder, and when the mower is restarted, the oil burns and turns your yard into a 70s disco. Sometimes oil will also leak from the muffler.
What engine is on Toro Zero Turn?
COMMERCIAL ENGINE The Toro single cylinder and Toro Commercial V-Twin engines — the same ones found on some of our industry- leading commercial zero-turn mowers — were specifically created to deliver optimal performance in our mowers to the needs of the Toro decks they power.
What brand engines does Toro use?
In 2015 TORO released the ZX engine which has become the most widely used engine in the Toro Z lineup. B T South has sold over 1400 pieces of equipment powered by this commercial engine and its outstanding performance has pushed it into the same league with other top tier engines.
What engine is on a Toro timemaster 30?
Powerful 10.00 ft-lb Gross Torque Briggs & Stratton® 223cc PXi Series engine delivers the performance and durability that you expect from Toro.
Is hydrostatic oil the same as hydraulic fluid?
In the case where the fluid is not moving, then the hydraulic pressure is equal to the hydrostatic pressure, but when the fluid is moving they do not have the same value. They are not interchangeable conceptually.
Is hydrostatic oil and hydraulic oil the same?
Sinopec Low Temperature Hydraulic Oil is a hydrostatic fluid intended to maintain its viscosity where there is a wide variation in ambient temperature.
How do I change my own oil?
- Step 1: Jack It Up, Open It Up. …
- Step 2: Unplug It, Drain It. …
- Step 3: Off With the Old Filter. …
- Step 4: Drain Plug in, Filter On. …
- Step 5: Fill It Back Up with Oil. …
- Step 6: Check the Oil Level, Check for Leaks.
What is hydrostatic hydraulic fluid?
Hydrostatic Fluid is an exceptional quality hydrostatic and anti-wear ISO 46 multi-viscosity hydraulic oil containing additional additives to prevent wear. It is designed to exceed the performance requirements of many major hydrostatic and hydraulic pump manufacturers.
When should I change the hydraulic fluid on my zero turn mower?
NOTICE: Change hydraulic fluid and filter after the first 75 hours of operation and then every 400 hours after.
How do you change the oil in a hydraulic Exmark zero turn?
- Step 1: Park Exmark on Flat Surface. …
- Step 2: Locate Filters & Remove Guards. …
- Step 3: Remove Filters & Drain. …
- Step 4: Install New Filters. …
- Step 5: Loosen Vent Plug & Fill with Exmark Hydro Oil. …
- Step 6: Purge Air Out of the Hydraulic System.
What is hydraulic fluid made from?
Today most hydraulic fluids are based on mineral oil base stocks. Natural oils such as rapeseed (also called canola oil) are used as base stocks for fluids where biodegradability and renewable sources are considered important.
